Views: 0 Author: Site Editor Publish Time: 2026-11-19 Origin: ZEEMO FORM
If most of your concrete walls repeat and fit a standard panel grid, start by evaluating steel frame wall formwork. If wall heights vary or the drawings call for offsets, irregular corners or a specific joint pattern, ask for an H20 timber beam layout as well. To compare the two systems, give both suppliers the same wall drawings and have them show how their panels fit the most difficult part of the job.
H20 timber beam wall formwork combines a plywood face with H20 timber beams and steel walers. The panel layout can be configured around the wall geometry. On a job with several wall heights, ask the supplier to show which assemblies can move to the next pour and which need to be altered.
Steel frame wall formwork uses framed panels in a defined size range. Where wall dimensions match the panel grid, the crew can repeat the same arrangement across multiple pours. Ask to see how the panel schedule deals with short returns, openings and dimensions that fall between standard panel widths.
What the drawings show | What to ask the supplier to show |
|---|---|
A long wall repeated on several floors | Which panels carry over from pour to pour and which have to be rearranged |
Openings, offsets or short wall returns | Where fillers, stop ends or special panels are needed and whether they are included in the quote |
Limited crane access | The weight and dimensions of the proposed assemblies and which moves require the crane |
Exposed concrete | The location of face joints, tie holes and transitions for architectural review |
Suppose your project has 10 wall pours, including 8 repeated layouts and 2 layouts with offsets. This is an illustrative tender scenario. Ask each supplier to draw one repeated layout and the more difficult offset layout. Then have them mark which components can be reused across all 10 pours and list any items needed only for the two offset pours.
Compare panel quantities, fillers, ties, braces, handling items and exclusions against the same pour sequence. Ask each supplier to identify what is supplied and what your site team must source separately. Where a proposal lists panel weights or pressure ratings, request the data for the actual configuration and have your project engineer review it before approval.
Send us a typical wall elevation, a detail of the most challenging corner or opening, and your planned pour sequence. Include any crane access restrictions and exposed concrete requirements. ZEEMO FORM can prepare a formwork layout proposal based on your project drawings. To get started, use the Inquire button on our ZEEMO H20 wall formwork product page.
